 | Heavy Duty Wash Basin: G20475L Ref: G20475L
The washbasin is manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish, with one tap hole, a 32mm flush grated waste is supplied. Bolts and fixing provided. Note: This washbasin is only suitable for duct wall mounting. L or R after the code number refers to the handing of the tapholes.
1 taphole L
Dimensions Available Here
|
|
 |
 | Heavy Duty Wash Basin: G20475R Ref: G20475R
The washbasin is manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish, with one tap hole, a 32mm flush grated waste is supplied. Bolts and fixing provided. Note: This washbasin is only suitable for duct wall mounting. L or R after the code number refers to the handing of the tapholes.
1 taphole R
Dimensions Available Here
|
|
|
 | Heavy Duty Wash Basin: G20475N Ref: G20475N
The washbasin is manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish, with one tap hole, a 32mm flush grated waste is supplied. Bolts and fixing provided. Note: This washbasin is only suitable for duct wall mounting. L or R after the code number refers to the handing of the tapholes.
2 taphole
Dimensions Available Here
|
|
|
 | Heavy Duty Wash Basin: G20479n Ref: G20479n
The washbasin is manufactured from 1.5mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish with two tapholes and is supplied with a 32mm flip-over wast and overflow. Complete with undershield and concealed brackets for screw to wall installation. Security screws are used for fixing the undershield to the washbasing. No screws or sowels included.
Dimensions Available Here
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Wash Basin: Anmx450 Ref: Anmx450
Wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded bowl with dimension 360x272x135 mm, made of one piece, for high risk vandalism areas due to seamless closed trap cover and semicircular shape, rounded edges, bowl with revolving channel, 40 mm tap ledge, without overflow, 1 1/2" flat perforated waste, drainage centric, incl. trap DN 32, with pressed soap dish, incl. mounting plate conform to EN 32, incl. stainless steel screws and dowels.
Dimensions Available Here
|
|
|
|
|
 | Wash Basin: Xinh200 (Shelf On Right Hand Side) Ref: Xinh200
Wash basin "Beauty Wash" for wall mounting, stainless steel, surface satin finished, material thickness 3 mm, bowl high polished and seamless welded into worktop, bowl diameter 386 mm, 45° folded edges, heightened shelf for dry area, with tap ledge and 35 mm tap hole, 1 1/4" pop up valve with overflow set, trap on site, mounting with integrated assembly brackets, 280 mm gauge between mounting holes allows mounting according to EN 32, incl. stainless steel screws and dowels.
Dimensions Available Here
Price: £1,202.62 (£1,443.14 Including VAT at 20%)
|
|
|
 | Wash Basin: Xinh201 (Shelf On Left Hand Side) Ref: Xinh201
Wash basin "Beauty Wash" for wall mounting, stainless steel, surface satin finished, material thickness 3 mm, bowl high polished and seamless welded into worktop, bowl diameter 386 mm, 45° folded edges, heightened shelf for dry area, with tap ledge and 35 mm tap hole, 1 1/4" pop up valve with overflow set, trap on site, mounting with integrated assembly brackets, 280 mm gauge between mounting holes allows mounting according to EN 32, incl. stainless steel screws and dowels.
Dimensions Available Here
Price: £1,202.62 (£1,443.14 Including VAT at 20%)
|
|
|
 | Wash Basin: Xinh203 Ref: Xinh203
Single wash basin "Aquina S" for wall mounting, stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 2 mm, bowl high polished, seamless welded bowl with diameter 260 mm, 75 mm tap ledge, with overflow and 35 mm tap hole, 1 1/4" pop up waste with overflow set, prewelded mounting brackets, mounting conform EN 32, incl. stainless steel screws and dowels.
Dimensions Available Here
Price: £386.74 (£464.09 Including VAT at 20%)
|
|
|
 | Wash Basin: Xinh204 Ref: Xinh204
Single wash basin "Aquina L" for wall mounting, stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 2 mm, bowl high polished, seamless welded bowl with diameter 360 mm, 90 mm tap ledge, with overflow and 35 mm tap hole, 1 1/4" pop up waste with overflow set, prewelded mounting brackets, mounting conform EN 32, incl. stainless steel screws and dowels.
Dimensions Available Here
|
|
|
 | Wash Basin: Xinh500 Ref: Xinh500
Wash basin for disabled for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded round bowl with diameter 350 mm, rectangular shape, 75 mm tap ledge, without overflow, seamless welded waste with 32 mm drain pipe, drainage centric, prewelded mouting brackets, for recessed trap mounting - trap not included, mounting conform to EN 32, disabled accessible mounting conform to DIN 18024-2 possible, incl. stainless steel screws and dowels.
without taphole
Dimensions Available Here
|
|
|
 | Wash Basin: Xinh501 Ref: Xinh501
Wash basin for disabled for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded round bowl with diameter 350 mm, rectangular shape, 75 mm tap ledge, without overflow, seamless welded waste with 32 mm drain pipe, drainage centric, prewelded mouting brackets, for recessed trap mounting - trap not included, mounting conform to EN 32, disabled accessible mounting conform to DIN 18024-2 possible, incl. stainless steel screws and dowels.
with taphole
Dimensions Available Here
|
|
|
 | Wash Basin: Bs204 Ref: Bs204
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 500x335x155 mm, oval shape, 90 mm tap ledge, prewelded mounting brackets, with soap dish, incl. screws and dowels.
without overflow, 1 1/4" flat perforated waste
Dimensions Available Here
Price: £212.02 (£254.42 Including VAT at 20%)
|
|
|
 | Wash Basin: Bs205 Ref: Bs205
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 500x335x155 mm, oval shape, 90 mm tap ledge, prewelded mounting brackets, with soap dish, incl. screws and dowels.
with overflow, 1 1/4" plug waste
Dimensions Available Here
Price: £223.60 (£268.32 Including VAT at 20%)
|
|
|
 | Wash Basin: Wb240wm Ref: Wb240wm
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 240 mm, semicircular shape, 45 mm tap ledge, without overflow, 1 1/2" flat perforated waste, drainage centric, incl. screws and dowels.
Dimensions Available Here
Price: £352.42 (£422.90 Including VAT at 20%)
|
|
|
 | Wash Basin: Brp260E Ref: Brp260E
Single wash basin for wall mounting in 90° corners, stainless steel, surface high polished, material thickness 1.25 mm, seamless welded bowl with 260 mm diameter, rounded edges, without overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 192 mm high perforated facia panel, incl. 5/4" waste kit with flat perforated waste, incl. screws and dowels.
Dimensions Available Here
|
|
|
 | Wash Basin: Brc390sf Ref: Brc390sf
Single wash basin for wall mounting, stainless steel, surface on both sides satin finished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high perforated facia panel, incl. 5/4" overflow kit with plug waste, incl. screws and dowels, trap cover can be delivered optional.
Dimensions Available Here
Price: £501.40 (£601.68 Including VAT at 20%)
|
|
|
|
|
 | Wash Basin: Brp390 Ref: Brp390
Single wash basin for wall mounting, stainless steel, surface on both sides high polished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high perforated facia panel, incl. 5/4" overflow kit with plug waste, incl. screws and dowels, trap cover can be delivered optional.
Dimensions Available Here
Price: £520.12 (£624.14 Including VAT at 20%)
|
|
|
|
|
 | Wash Basin: Anmx205 Ref: Anmx205
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 0.9 mm, seamless welded round bowl with diameter 277 mm, semicircular shape, 45 mm tap ledge, without overflow, 1 1/4" flat perforated waste, drainage centric, semicircular front panel with 310 mm height, incl. screws and dowels.
Dimensions Available Here
Price: £350.08 (£420.10 Including VAT at 20%)
|
|
|
|
|
